Installation method of chain link fence

The installation of chain link fence generally requires 2-3 people, a special pliers, and several buckle accessories. This kind of chain link fence is widely used.

First, bury the chain link fence post about 0.5 meters in the ground. If you want to make the post stronger, you can pour it with cement. If it is only for temporary protection, tamping the column after pre-embedding. Then unfold the fence and connect the post and the net with special calipers.

Key points for installation of chain link fence:

1. The buckle must be stuck at the intersection of the net, and the pliers must be stuck firmly;

Second, it is best to install an extra post at the installation corner and try to avoid right-angle corners.

Third, the heavy cargo transportation or installation process is prone to wear and tear, the product will wear out of the outer plastic, and it is easy to rust for a long time. It is best to repair it with self-painting after installation!

1. Professional installation tools and calipers

2. Dedicated supporting columns, as well as necessary accessories, rain caps, etc.

3. Dig a foundation pit of 40 cm x 40 cm x 50 cm in the ground before installation, with an interval of 3 meters

4. Use cement to pour the vertical column, then unfold the fence net, use the caliper to clamp the mesh wire and the column tightly

5. If there are special requirements, a broken column and a set of longitudinal diagonal braces can be strengthened every 30 meters.