Home / NEWS /

For chain link fence installation

For chain link fence installation, it is vital to follow the correct procedures. Here is a general step-by-step guide to installing a chain link fence:
 

Prepare the area:

Mark the fence line and clear any obstructions in the area.

Before digging post holes, check if there are utilities underground.

Install end and corner posts:

Dig holes for the end and corner posts, making sure they are deep enough and properly spaced.

Set the posts in the concrete, making sure they are aligned vertically.
 

Set the line posts:

Dig holes for the line posts at regular intervals along the fence line.

Set the line posts in the concrete, making sure they are at the same height.
 

Attach rails and accessories:

Install the top rail between the end and corner posts.

Attach the line posts with tensioning straps, support straps, and rail ends.
 

Stretch and install chain link fabric:

Unroll the chain link fabric along the fence line.

Attach the fabric to the end, corner, and line posts, making sure it is taut and straight.
 

Secure bottom tension wire:

Install tension wire along the bottom of the fence to hold the fabric in place.

Add Top Rail and Tie Straps:

Install top rail over fabric and secure with tie straps.
 

Attach Accessories and Gate:

Install gate posts and attach gate chain link fabric and accessories.
 

Securing Fence:

Check fence stability and make adjustments as needed.

Secure all accessories and posts firmly in place.
 

Finishing Touches:

Trim excess chain link fabric.

Add any desired accessories or finishing touches.
 

Keep in mind that specific installation requirements may vary depending on the type of chain link fence and local regulations. It is recommended to consult the manufacturer's instructions for complex installations.

Pre：Welded Wire Mesh: A Versatile Material for a Variety of Uses

Next：Guidelines for Installing Double Wire Mesh Fencing