Palisade fencing installation guide

Palisade fencing has a very simple structure, consisting of little more than a handful of posts, horizontal rails and numerous wooden or metal slats known as pales.Steel palisade fencing often tipped with spiked elements, gives your home a Victorian look while providing additional security. Palisade fencing installation guides are as follows:

Palisade fencing installation guide Step 1

Bring all of the fence materials and tools to the fence site. Remove all packaging from the materials.

Palisade fencing installation guide Step 2

Place two horizontal railings between each set of posts. Lay out the appropriate number of pales you need for each fence section, along with the rails, between posts. The installation manual should contain information on the correct number of pales.

Palisade fencing installation guide Step 3

Affix the horizontal rails to the fence posts using a drill and the recommended bolts. Follow manufacturer's instructions for exact placement. Use your tape measure to determine distances.

Palisade fencing installation guide Step 4

Determine the necessary distance between the fence posts and the first pale using your tape measure and the manufacturer's installation instructions. If the horizontal rails contain bolt holes, use these as your guide for lining up pales.

Palisade fencing installation guide Step 5

Place the first pale pale vertically against the two horizontal rails so that the bolt holes in the pale line up with the rails.

Palisade fencing installation guide Step 6

Use the drill to drive bolts through the pale into both the upper and lower horizontal rail.

Palisade fencing installation guide Step 7

Determine the distance between your first pale and the second pale using the tape measure and installation instructions. Install the second pale as you did the first, and repeat this process until you install all pales.

Palisade fencing installation guide Step 8

Place a support footer underneath the middle pale in each section of palisade fencing. Affix it to the lower horizontal rail or middle pale using the drill. A support footer is a piece of metal or other material that drives into the ground and attaches to the fence to help support its weight and buffer the fence's weak middle against impact.

Hope that this palisade fencing installation guide will help you.

Name: Jenny 
Mobile:+8618031285129 
Email:Jenny.guo@chinafencewiremesh.com  

Palisade fencing installation guide

Pre：Introduction of welded mesh fencing

Next：Palisade fencing mesh installation guide