Welding and installation of the chain link fence

The chain link fence is a new type of protection designed for the stadium. This product has high net body and strong anti-climbing ability. The stadium fence network belongs to the kind of site fence. It is also called: "Sports fence". It can be installed on the site to install the fence and fence. The biggest feature of the product is flexibility. The mesh can be adjusted at any time according to requirements. Structure, shape and size.

 

The chain link fence is especially suitable for use as a stadium fence, basketball court fence, volleyball court and sports training venue within a height of 4 meters.

The following are the welding and installation requirements for the chain link fence.

 

1. Pre-buried installation should ensure that the depth of the foundation pit is consistent, otherwise it will be difficult to ensure that it is on a horizontal line after the column is placed in the foundation pit.

 

2. For the installation of pre-embedded parts, since the embedded parts should be placed in the foundation pit in advance, the spacing of the embedded parts must be measured. It is necessary to ensure that the center distance is the same as the center distance of the fences, otherwise it will be Can not be installed.

 

3, welding, pay attention to full welding, can not leak welding, to prevent rust.

 

4, the expansion screw is fixed, the length of the expansion screw should be selected, can not exceed the cement layer.