Work before installing the chain link fence

The chain link fence is a new type of protection designed for the stadium. It is mainly used for stadium fences, basketball court fences, volleyball venues and sports training venues.

 

The necessary condition before the installation of the hook flower net guardrail is that the ground needs to be done well. How to do the installation of the ground before installing the hook flower net guardrail.

 

Repair some pits and depressions, then clean or wash the entire site. It should be noted that the repaired site must be dried (usually 24 hours) before continuing construction.

 

Foundation reinforcement layer: In order to enhance the strength, flatness and service life of the site, the main raw material of the plastic surface layer, acrylic acid, quartz sand and water, are mixed and mixed into a kind of emulsion according to a certain proportion, and evenly laid on the site.

 

Hook-and-flower net guardrail shop bonding layer: It needs to be coated with a layer of adhesive on the base surface layer, which can be tightly bonded to the cement surface and tightly combined with the plastic material of the surface layer to prevent degumming and peeling. And other issues.

 

The construction of the hook flower net guardrail oil: mainly by mixing the acrylic oil with a certain proportion of water and evenly spreading on the filling layer. It is brightly colored, resistant to UV fading, and has a certain degree of wear resistance.

 

The chain of the hook flower net guardrail is filled with the base material of acrylic color layer and added with appropriate quartz sand. The effect of incorporating quartz sand is not only wear resistance, but also the speed of controlling the ball speed can be adjusted according to the amount of the amount.

 

The above is related to the chain link fence, I hope to help you.