What are the faults when using the chain link fence opportunity?

The chain link net is made of hooks made of hooks and nets using various materials. It can be divided into two types: shrinking and gripping.

 

What faults will occur in the use of the chain link machine? How to solve it?

 

1, mold card wire

 

Exclusion: Check if the mold is concentric with the output shaft and the mold is damaged.

 

2, failure: the mesh is not flat

 

Exclude: Adjust the handle wheel.

 

3, the spindle does not turn

 

Exclusion: Remove the cover and adjust the clutch.

 

4, the same number of laps, but the length is not the same

 

Exclusion: The wire is too soft and hard to change the wire.

 

5, the lubricating fluid does not circulate

 

Exclusion: Check the pump, the liquid level is too low, add lubricating fluid

 

What are the characteristics of the chain link machine?

 

1. Diverse production specifications, high degree of automation, (automatic rolling, automatic shearing, automatic threading, automatic folding or threading) saves time and effort, high efficiency, good mesh quality

 

2. Simple operation, scientific and reasonable structure, high production efficiency, one person can operate two machines at the same time or two people can operate three to five machines at the same time.

 

3, does not pick the wire, the hardness of the galvanized iron wire has little effect on the machine, and solves the problem that the softness and hardness of the two wires of the double wire must be consistent.

 

4. Mechatronics and the pneumatic transmission method simplifies the mechanical transmission structure, which reduces the number of fault points and reduces the failure rate, and the pneumatic original is relatively convenient and quick to repair.