The method of assembling the chain link fence

chain link fence is especially suitable for use as a stadium fence, basketball court fence, volleyball court and sports training venue within a height of 4 meters. The dip-molding product is based on steel, and the weather-resistant polymer resin is the outer layer (thickness 0.5-1.0MM). It has anti-corrosion, anti-rust, acid and alkali resistance, moisture resistance, insulation, aging resistance, good hand feeling, environmental protection and long life.

 

What are the assembly methods for the perimeter fence of the stadium?

1. Reinforced fixed stadium protection net

 

Indirectly fixing the course net by the steel bar, this method is the most commonly used assembling method of the fence net. The fence is supported by the steel bar to form a rectangle, and then the supporting bars are installed in the correct direction to the fence frame of the course. The manufacturers have welded the side ears of the linked steel bars and fixed them with screws.

 

2, angle iron wrapped stadium protection net

 

Reinforce a layer of angle iron on the basis of flat iron; use the shape of the angle iron to wrap the joint

 

3, flat iron fixed stadium protection net

 

The plastic mesh is fixed to one side of the frame by flat iron. The flat iron fixed basketball court fence requires on-site welding frame, and after being inserted into the fence, it is fixed by screws.

 

4, welded stadium perimeter protection net

 

The net is welded directly to the frame. This method firstly welds the ball fence assembly frame and expands the fence to the frame.