Precautions when purchasing mesh fence

Precautions when purchasing a fence mesh

 

The fence network was gradually developed in the past two years. The old-fashioned traditional fence mesh was made up of cast iron railings, which was not only cumbersome but also costly. At present, the fences used in China, especially the fences used on traffic roads, have basically been replaced by a large part. Therefore, customers should keep their eyes open when purchasing the fence mesh, and pay attention to some specific details.

 

The first is the material of the fence mesh. The new fence mesh is made of wire-wrapped, so the thickness of the wire is what people usually say is the quality of the fence. The wire mesh of the fence mesh is generally between 380 and 600. The wire 380 means that the diameter of the coated wire is 3.8 mm, and 600 means that the diameter is 6 mm. The thicker the fence, the better the quality and the stronger.

 

Then you should pay attention to the mesh of the fence. The size of the mesh determines the number of wires to be used. The smaller the mesh, the more the quality of the fence mesh is stronger. Conversely, the larger the mesh, the more general the quality of the fence. Usually the mesh of the fence has 5*5, 7*15, 8*16, 8*20 sizes. When purchasing, customers can determine the mesh fence using the mesh according to their own needs.

 

At the same time, if you pay attention to the column of the fence. In order to be beautiful and sturdy, some fences use peach-shaped columns. The fences that come out of this way are beautiful and generous, and are generally used in places with good environment such as parks. The column of the fence net has 48 tubes, 60 tubes, etc. The customers also choose according to the senior requirements.

 

The last is the surface treatment. The traditional fence mesh is painted on the surface, so the effect is not very good, the wind is blowing, the surface of the fence will be aging and cracking in a year. The mainstream nowadays is the way of wire-impregnated plastic molding. The high-temperature is used to make PVC powder adsorb on the surface of the wire, and then cooled. This surface treatment method is scientific and economical, which can guarantee that the fence mesh will not fade and not aging within ten years, at the same time The reinforcement of the fence mesh is solid.