wire mesh fence installation

The fence net is an important security barrier. As an important equipment, we must pay close attention to the details of the fence network in the process of the installation to ensure that the equipment of the fence is in place. Before the construction of the fence net, the steel bars should be pre-buried for re-inspection. For the missing, leaking and misaligned steel bars, the method should be adopted and rectified before they can start construction.

Fence net device details In the construction process of the fence net, it is necessary to accurately stake out the sample. To stake out the fence net, the inner side should be drawn and fine-tuned according to the linearity to ensure the linearity of the fence net. Pay attention to the steel bar of the fence net. The skeleton of the steel bar is manufactured according to the planning requirements, and it is connected with the pre-embedded rib of the beam top. When the device is installed, the orientation of the steel bar should be adjusted according to the drawing point to ensure the protective layer.

 

The template device is also very important. The template should use the integral steel mold. When the device template is used, the wrong phenomenon should be strictly controlled. The joint between the template and the pavement layer should be filled with sponge material to ensure the seam is tight and the slurry is not leaked. Together, use a special release agent to ensure uniform color and lubricity. The details of the fence net device should be paid attention to in the construction of concrete. The one-side guardrail in the same span should be poured at one time.

 

For concrete pouring, the method of splitting and dividing into three layers is adopted. The first layer should be controlled at about 25cm, the second layer should be poured to the top of the guardrail for about 35cm, and then poured to the top of the guardrail. When pouring to the top surface, a special person should be sent to finish the top surface finish to ensure that the top surface is bright and the line runs smoothly after the guard rail is formed. The straight line segment of the guardrail network should be straight, the curved section should be curved, no fold line and dead bend, and the top surface should be smooth and beautiful.