Linkland Fence Linkland Fence
Home / NEWS /

anti-climb fence installation method

Jul 13, 2019
anti-climb fence is also called "border type anti-climbing welding net", "frame" and so on. It is a very flexible assembly product widely used in China's roads, railways, highways, etc.; it can be made into a permanent mesh wall, or it can be used as a temporary use, only by using different column fixing methods.
Frame fence mesh outside the name Frame fence material low carbon steel wire through 3.0-6.0mm frame 20x30m English: Framework wiremesh Fence frame fence mesh is widely used, the popularity is higher than the general fence mesh, the column can be processed into a movable form, convenient for users Used in different occasions, in addition, the frame type fence mesh has very good impact resistance, which is doubled compared with the general fence mesh.
anti-climb fence installation method
Frame fence mesh Product specifications: Mesh (mm): 75x150 80x160 Mesh (mm): 1800x3000 Frame fence mesh frame fence border (mm): 20x30x1.5 20x30x1.0 before mesh dipping (mm): 3.0-7.0 After mesh molding (mm): 3.5-7.0 Column size (mm): 48x20x2200/40x40x1.5x2200 Overall bending: 30° bending length (mm): 300 Column spacing (mm): 3000 Column pre-buried (mm): 250-300 Pre-buried foundation (mm): 500x300x300 or 400 x400 x400 Surface treatment: dip, spray, cold galvanizing, hot-dip galvanizing, hot dip galvanizing, dip coating
The advantages of frame fence mesh products: beautiful, durable and quick to install, it is an ideal metal mesh wall, which has been widely used in various industries. After hot-dip galvanizing, the anti-corrosion performance is strong and the cost is low.
The frame fence mesh is made of high-quality wire rods as raw materials. It is protected by corrosion and UV resistance by galvanized, pre-primed and high-adhesive powder coated three-layer welded mesh.
The surface of such a fence mesh is galvanized and sprayed, and either one of them may be provided with a plastic cover or a rain cap at the top end. Depending on the environment and installation method, you can use the embedded 50cm, plus the base.
Attach the mesh and column of the frame fence to the screws and various special plastic or iron clips. All screws are automatically burglarproof. The accessories used can also be designed according to the specific requirements of the customer.
Frame fence mesh product category: frame railing net for railway, mainly using cement column column, triangular flat iron as outer frame side frame, which is made of more practical 5.5mm wire.
The main features are strong corrosion resistance and low cost. The frame fence for the school is mainly used for the anti-collision hook type net with strong safety. The frame is mostly 60 cylinders, and the mesh surface is a diamond-shaped scratch-resistant green net.
Frame fence for highways: Mainly adopts ordinary 48 cylinders, square tubes of 20X30 frame, which are connected by standard. Main features: low cost and cheap installation. Column: The surface treatment is galvanized and sprayed. You can also choose one of them. The top cover is covered with a plastic cover or a rain cap. Depending on the environment and installation method, you can use the embedded 30cm cement pouring and base.
The mounting mesh and the post are connected by screws and various special plastic or iron clips. All screws are automatically burglarproof.
anti-climb fence installation method
Installation of the frame fence network: The installation of the frame fence network is mainly divided into two parts: the column and the frame net. The stability of the column during the installation process is critical to the overall firmness of the frame fence and plays a role.
The fixing method of the frame fence installation is actually the installation method of the column and the ground, and the installation method is different depending on the environment.
1. Pre-embedded installation The pre-embedded installation is the most common way to install the frame fence. It is suitable for the land surface. In fact, it is very simple, that is, the column is the longest, usually 30-50 cm pre-buried. Foundation and digging pits, then put the column into it, directly grout the cement, and let the cement dry before it can be.
Second, eye-opening installation Eye-type installation is also called ground-mounted installation, suitable for cement floor, is to weld a ground plate at the bottom of the column, also called the flange, and then punch the hole on the ground, directly on the ground, hit the expansion screw to punch Yes.
Because the construction environment has less cement floor and the eye-opening installation is relatively complicated, the eye-opening installation is rarely chosen. In summary, the fixed way of installing the frame fence is mainly divided into pre-buried installation and eye-opening installation. Because of the influence of the environment, people usually choose the pre-buried installation method.

Pre:Fence mesh introduction and specifications

Next:Introduction and installation of Field fence

Recent Posts

Follow Us

Fast Delivery Promise

Fast Delivery Promise

Join our mailing list for product update and news.


© 2024 Linkland Fence. All Rights Reserved.
hide