Reasonable matching of razor wire and fence mesh

In the protection project, the combination of the fence net and the blade barbed wire often occurs, and this kind of mutual matching has certain rules and methods.

1. Matching the fence mesh and the barbed wire installed on the fence

There are two kinds of fence nets installed on the fence: one is installed on the top of the fence, the style of the fence mesh is Y-shaped or the top is bent to the side with a 30-degree angle, and the barbed wire is installed on the top of the fence net to prevent Someone climbed over. The other is installed on the side of the upper middle part of the wall near the top position, the fence net height is higher than the top of the fence, and the barbed wire is installed at the top position of the fence net.

2. The matching of the fence mesh and the blade barbed wire installed on the ground

When the fence net is installed directly on the ground, there are two ways to install the barbed wire: the Y-type installation method and the straight-line installation method. The Y-type mounting method is a method of installing a roller blade barbed wire; the straight-line mounting method is a method of installing a common barbed wire, and directly pulling the barbed wire away from the column or a separate fixing frame.

There are two types of blade barbed wire: blade barbed wire and ordinary barbed wire. Among them, the blade barbed wire often appears in the drum style, and the diameter is 50 cm. It can be stretched at both ends to control the construction length of the blade to a certain extent. Ordinary barbed wire is a kind of protective product with thorns braided with galvanized iron wire or stainless steel wire. It can be installed by pulling the package into a tray.