Spray welding of iron fence

Spray welding of iron fences: Spray welding of iron fences uses a heat source to heat metal or non-metallic materials to a molten or semi-melted state, and blows them into fine particles (atomization) with a high-speed air stream (in a spray gun), and sprays them to The appearance of wrought-iron fences forms the exterior processing method of strong covering. This method can make the iron fence look different hardness.

Abrasion resistance, corrosion resistance, oxidation resistance, smoothness and other special physical and chemical functions. Many materials (metals, ceramics, plastics, cement, plaster, wood, etc.) can be painted. In order to improve the bonding strength between the sprayed layer and the base material, and reduce the porosity of the coating, the sprayed layer can be heated to melt with a heat source, so that the molten alloy of the sprayed layer and the base material are mutually soluble and dispersed.

Rhenium forms a similar metallurgical combination of brazing. This process is called spray welding, and the resulting coating is called a spray welding layer. Daily protection methods for iron fences: In the manufacturing process, iron fences need to be removed from oil, impurities, rust and anti-rust treatment before they become household iron goods. Therefore, pay attention to whether the appearance is bright.

Wrought iron guardrails should also be used as little as possible in areas that are simply scratched and wet, but should be placed in a dry, ventilated place to prevent corrosion. And when the iron fence has dust, you can use a soft brush to brush along the gap, and then scrub with a damp soft cloth, never use a hard brush.