358 security fence design combines high security and aesthetic. Panel sections are welded wire mesh with small rectangular openings 76.2mm ×12.7mm made from 4mm Galfan steel wires, and welded well at each intersection, then PVC powder coating with Green RAL 6005 or Black RAL 9005 color, which provides a protective anti-corrosion properties of sections for 10 years. 358 welded mesh high security fencing is extremely difficult to penetrate and difficult to attack using conventional hand tools. Has the features of anti-climbing and anti-cutting. It is usually used for fencing where require high levels of security, such as airport, prison and military establishments. So 358 mesh is also called prison fencing. This type welded panels width is 2515mm and height from 2007mm to 3302mm. Several panels can be installed on top of each other. Thus we can get 358 fencing achieved a total height of 6300mm.
358 mesh fence is wildly used for the places need high security protection, such as prison, military zone and other places need or have lower security control. The main market of 358 mesh fence is in South Africa, United States and Nigeria. Mostly the clients prefer hot dipped galvanized surface treatment. If you need a reliable 358 mesh fence supplier in China, please contact us anytime.
Height: the height of the 358 mesh fence panel.
Width: the distance between two 358 mesh fence posts, measure from center to center.
Wire Thickness: diameter of the wire of 358 mesh fence, normally the horizontal wire is 3.0mm, vertical wire is 4.0mm.
Mesh Size: the size of mesh for 358 mesh fence panel, normally is 76.2mm*12.7mm.
Hot Dipped Galvanized: dip the fence in to a container that is full of liquid zinc, to prevent the 358 mesh fence from getting rusty.
Electric Galvanized + Polyester Powder Coated: electric galvanized (zinc coating 8~12g) as a pre – surface treatment inside, polyester powder layer outside, to prevent the 358 mesh fence from getting rusty.
358 mesh fence has a lot of different installation solution according to different accessories. Connecting with flat bar with bolts and nuts is the most common one for 358 mesh fence, but we have other multiple choice to installation such as connecting with our fence V clips or with 358 mesh fence spider clamp. We will give an example for 2.5 linear meter width 358 mesh fence installation process with three different
connecting solution.1.Measure the distance in every 2.5 linear meter and dig holes on the ground. We can also speed up by dig the holes together for all post. Installing the post in to the holes (usually more than 500mm deep) and filling the earth back to the holes for fill the liquid concrete inside to make sure the post is stable enough and will not move. If the ground is concrete, please set up the post flange plate with anchor bolts.
Standing up the 358 mesh fence panel. The weight of 358 mesh fence panel is much heavier than other kind of fence. Normally we need two staffs to lift it at least. Make sure the space between the post and panel is correct.
(A)If we install with flat bar, please cover the flat bar on the face side of the panel, make sure the 358 mesh fence panel is in the middle of the post and flat bar, then set up the bolts and nuts. (B) If we use the fence V clips with self drilling bolts, please set up the V clips first, then use self drilling bolts drill in to the post wall. Normally the spacing of every two V clips is about 500mm. (3) If connecting with 358 mesh fence spider clamp, please install the finger of spider clamp go through the mesh and make sure the clamp is hanging the panel.
Pre： Roll Top Fencing - Rolled Beam Section at Top and Bottom Edge
Address
Fast Delivery Promise
Join our mailing list for product update and news.
.png)
.png)
.png)
.png)
