welded wire mesh fence panels

The use of buried and foot plate installations not only saves building foundation costs but also saves land resources. The installation method is also different in different situations:

 

　　 1. For different high-rise buildings, the installation height of floors below 24m shall not be less than 1050mm, and for floors of 24m and above, the installation height shall not be less than 1100mm. When installing vertical railings, the distance between the railings should not exceed 110mm to prevent accidents caused by excessive width. .

 

　　 2. When installing, it has a lot to do with the on-site environment. If wall-mounted installation is adopted, the reinforced concrete structure, red bricks can be directly digged into the wall, and shield railings can be installed. If it is hollow bricks, the pouring needs processing. If it is installed in the ground, like the former, if there is a plastering layer of 20-30mm, the thickness of the plastering layer needs to be deepened. When installing the brackets, they should be installed above the plastering layer to the structural layer, and pay attention to the expansion screw into the ground. 3 /5 to the structural layer, generally M6x80.

 

3. Snap a line on the finished surface to mark the position of each zinc steel balcony railing post, and drill holes in the post with an electric hammer drill. The diameter of the drill bit is the same as the diameter of the steel bar of the column. Use a hammer to drive the steel bar into the column. In the drill hole, insert the flower ornament into the column reinforcement.