welded wire fence vs woven wire fence

The pitch of welded wire meshes of different specifications is different, so the pitch between each grid will directly determine its final performance. Although the pitches are different, the curve performance between the entire welded wire mesh is definitely different. Yes, as the spacing between the meshes gradually increases, their products will gradually become longer, and the test force value in the middle will also become larger.

However, the tensile strength between the entire galvanized layer and the entire steel wire mesh is still guaranteed to be between 100, and the change is not particularly large. The spacing between the mesh openings of the welded wire mesh is also very small. The original performance of the layer behind the glass is very obvious, especially easy to observe.

As the spacing of the entire galvanized welded mesh meshes gradually increases, the tensile strength value of the solder joints will also gradually increase. At the same time, the spacing of the meshes between the entire spacing is the same, usually gradually Basically, it will increase by about 52 Newtons. Relatively speaking, it is much larger than the stress value of the original spacing mesh. This also shows that the longer the entire pattern, the tensile strength of the welding point of the entire welded mesh. The force value is more likely to cause errors, and as much as possible to use the length of the style specified in the standard, because this itself is a problem they should pay attention to.

The tensile force value of the welded point of the welded wire mesh is basically the maximum value in the curve. This quality also provides relevant standards for engineering acceptance and inspection. At the same time, the entire galvanized layer is peeled off. The original curve is relatively speaking It is still very obvious, and such a resin is basically controlled between 90 Newton and 100 Newton. At present, welded wire mesh is very popular in various industries.